Steroids Source Talk | Anabolic Steroid Forum - View Single Post

MIDNIGHT · #2 (**permalink**) 01-20-2010, 11:00 PM

RECONSTITUTING AND MEASURING YOUR HGH
So you now have a vial HGH in the form of lyophilized powder. The amount of this powder should be indicated on the vial somewhere. It will either be stated in Units (IU’s) or in Milligrams (mg). If it is stated in milligrams, the conversion is most commonly stated as 1mg = ~3IU’s (its really more precisely 1mg=2.7IU). We will use this 1mg = 3IU’s for our guide since this is the standard most commonly referenced by manufacturers.

What we need to do with this lyophilized powder is add some Bacteriostatic water (BW), Sterile Water, or even liquid vitamin B12 to reconstitute it and make it ready to inject.

What we choose to reconstitute it with should depend on how rapidly we use the GH. Bacteriostatic water is basically sterile water with 0.9% Benzyl Alcohol added, and this Alcohol keeps anything from growing in the water, thus making it safe for injection for the longest amount of time, up to three weeks. If the amount of GH in our vial is enough to last for a few weeks at our desired daily dosage, BW is the wisest choice. For the common use for bodybuilding (2-5 IU’s a day) and the more commonly used vial size (10 IU’s), it isn’t really as critical which of the above listed dilutents are used … the vial will be used up long before bacteria or anything begins to grow in our reconstituted HGH. It is really personal preference outside of the considerations listed above.

RECONSTITUTING

1.) Take an alcohol swab and swab the stopper of both your HGH vial and the vial of the dilutent (BW, sterile water, B12).

2.) Take a 3cc syringe with a 23 or 25 gauge needle (1″ or 1.5″) and draw up and amount of your preferred dilutent. The amount isn’t critical, other than making sure you know exactly how much you have used. The best rule of thumb is choose an amount that will make measuring the final product easy

example- 1ml(cc) per 10 IU vial of HGH would mean each 10 mark on a U100 slin syringe would equal 1 IU of HGH

2ml(cc) added to a 10 IU vial of HGH would mean that the 20 mark on a U100 syringe would equal 1 IU of HGH

3ml(cc) added to a 10 IU vial of HGH would mean that the 30 mark on a U100 syringe would equal 1 IU of HGH

3.) Take this syringe with the dilutent and push it into the vial of lyophilized powder, angling so that the needle touches the side of the vial, and avoiding shooting the dilutent directly on the lyophilized powder. Make it run slowly down the side of the vial (don’t let it forcefully rush in).

4.) After all of the dilutent has been added to the HGH vial, gentling swirl (do NOT agitate or violently shake the vial) until the lyophilized powder has dissolved and you are left with a clear liquid. The HGH is now ready for use. Store your now reconstituted HGH in the refrigerator. If you used BW to reconstitute it will be good for three weeks. If you used sterile water, it will be good for about 5 days.

MEASURING

After you have successfully reconstituted your HGH, now you need to know how to measure the desired amount out for injection. You will want to use a U100 insulin syringe to draw out and inject your HGH.

Here is the way to figure out how much to draw out. Since you know the amount of IU’s in your HGH vial, and you also know how much water you have diluted it with, we just divide this out as follows:

You will need to know the following to be successful -

1ml = 1cc = 100 IU’s

So we take our number of IU’s of HGH from the label of the dry lyophilized powder (most commonly 10 IU’s for all of the Jintropin users), and we divide that into the amount of dilutent we used.

example- We used 1cc(ml) of water. We have a 10 IU vial of HGH.
From our formula above we know that 1cc = 100 IU’s, so we have 100 IU’s of water.
We now divide the 100 IU’s (the amount of our water) by 10 IU’s (the amount of our HGH)

100 IU / 10 IU = 10

This 10 will perfectly correspond with the markings on a U100 insulin syringe. In our example every 10 mark on our syringe will equal 1 IU of HGH. Want to draw out 2 IU’s of GH? ….draw out to the 20 mark on the syringe.

This is about all there is to it. So to recap, just keep straight:

1.) How much actual HGH you are dealing with (read from the vial)
2.) How much water (dilutent) you are using to add to the actual HGH.
3.) Divide the amount of water in units by the amount of GH in units.
4.) This result will equal the measurement on your U100 Insulin syringe per unit of GH.
5.) multiply the number you get it step 4 by how many units you want to inject. This is the number to draw to on your syringe.

Now that we have a basic understanding of what HGH is, how it does its work, and how to reconstitute and measure it, lets look at some strategies for using this hormone to our best advantage.

STRATEGIES FOR USING HGH

There are many different approaches to taking HGH. The right approach for your particular situation will depend on your goals. For many, HGH is a general supplement to help maintain low bodyfat percentages and reasonable levels of lean body mass. For others who have reached their genetic potential for growth, HGH is a supplement that can assist in continued growth beyond what your parents gave you to work with. For yet others, it is a supplement that is used for general health and healing of injuries. Let’s look at each of these uses with respect to a reasonable HGH program.

For bodybuilders, HGH (and the IGF-1 that is a result of its use) is the only substance that can actually initiate hyperplasia, which in the interest of our use in bodybuilding equates to new muscle cells. While use of anabolic steroids can cause hypertrophy (the enlargement of existing muscle cells), steroids do not offer the ability to recruit and mature more muscle cells. HGH can. HGH also increases protein synthesis, which can be responsible for hypertrophy. HGH also strengthens and heals connective tissues, cartilage, and tendons. These uses are what make it so attractive to athletes in all sports, and in bodybuilding in particular.

To begin with, it should be stated that for the vast majority of HGH users, results are not rapid and earthshaking in nature. If your idea of using HGH is to get ripped in a few weeks, gaining 20 pounds of muscle in a matter of a month or two, or being miraculously healed in a matter of a few injections … you are likely in for a BIG disappointment. HGH does some pretty incredible things, but it HAS to be viewed as a long-term endeavor. A reasonable length HGH cycle would be 20-30 weeks in length. While you will always be able to find the one or two individuals who will make great strides in a short amount of time, the majority of us need to be dedicated to its use for the long haul for it to be a worthy venture.

As mentioned in our introduction to HGH, one of the major roles it plays in growth is by its acting on the liver, muscle cells, and other tissues, which in turn secretes IGF-1. This process is cumulative in nature, and it will take some time for your exogenous HGH use to bring your IGF-1 levels to create an environment conducive to optimal growth. While it is true that HGH begins shuttling nutrients to your muscles, and begins mobilizing fat from the first injection, these behind the scenes benefits will only be VISIBLE several weeks (up to 12) down the road.